Salient Features

• Temperature-Pressure compensated Flow.
• Indication through LCD.
• Input selectable as linear / square root / 10 point    linearization table.
• Normal mode for operation.
• Averaging of inputs for flow cut-off.
• Programmable low flow cut-off.
• Software calibration.

Electronet’s series FL-600 PTC is micro-controller based temperature pressure compensated flow indicator totaliser designed for various industrial applications. These can be used for indication & tantalization of flow. Theses three individual inputs can be provided for flow, temperature & pressure. The built-in battery back-up is provided for the memory to avoid loss of data in case of power failure. The micro-controller based design provides full flexibility for flow metering applications.

Technical Specifications

Operating Modes: Normal / Batch
No. of Input: 03 no.

Input:

1. 4-20 mA for Flow
2. 4-20 mA / RTD for Temperature
3. 4-20 mA for Pressure

Display: 16 x 2 LCD consist of 4 digit for Flow Rate Indication & 8 digit for Totalised Flow Indication
Range: Programmable (0 to 9999)
Accuracy: Better than +0.25% of F.S.
Open Sensor Indication: Provided

Power Supply:

1. 230 V AC
2. 24 V DC
3. 110 V AC
4. 24 V AC

Power Consumption: Less than 10 VA
Temperature Drift: < 0.01% of F.S. per ⁰C change
Response Time: < 100 mSec
Isolation: 1.4 KV between Input, Output & Power Supply
Enclosure: MS Powder Coated
Dimensions:72 (H) x 144 (W) X 250 (D) in mm
Mounting: Flush of the Panel
Weight: 2 kg (Approx.)
Operating Conditions: Temperature 0 to 55⁰C / Humidity 5 to 95% non condensing

OPTIONAL

Transmitter Supply: 24 V DC, 30 mA (Single / Dual)
Retransmission Output:4 to 20 mA / 1 to 5 V, Isolated
Alarm Output: Potential free Relay Contact – 2 nos ( 1 c/o, 1 Amp. @ 230 V AC) Configurable for high, low
Batch Output: Potential free Relay Contact (1 c/o, 1 Amp. @ 230 V AC)
Communication Port: RS 485 / RS 232 supporting MODBUS RTU protocol