Electronet’s series FL-700 is micro-controller based flow indicator totaliser designed for various industrial applications. These can be used for indication & tantalisation of flow. The input can be processed linearly or square rooted or with 10 point linearisation table in case of non-linear flow as per requirement. The built-in battery back-up is provided for the memory to avoid loss of data in case of power failure. The micro-controller based design provides full flexible for flow metering applications.
Technical Specifications
Operating Modes: Normal / Batch
No. of Input: 01 no.
Input: Linear / Square Rooted / 10 Point Linearisation Table
- Current (0-20 mA / 4-20 mA)
- Voltage (1-5 V / 0-5 V)
- Frequency (0-10 Khz)
Display: 8 x 2 LED consist of 4 digit for Flow Rate Indication & 8 digit for Totalised Flow Indication
Range: Programmable (0 to 9999)
Accuracy: Better than +0.25% of F.S.
Open Sensor Indication: Provided
Power Supply:
- 230 V AC
- 24 V DC
- 110 V AC
- 24 V AC
Power Consumption: Less than 10 VA
Temperature Drift: < 0.01% of F.S. per 0C change
Response Time: < 100 mSec
Isolation: 1.4 KV between Input, Output & Power Supply
Enclosure: MS Powder Coated
Dimensions:
- 144 (H) x 72 (W) X 250 (D) in mm
- 96 (H) x 96 (W) x 250 (D) in mm approx.
Mounting: Flush of the Panel
Weight: 2 kg (Approx.)
Operating Conditions: Temperature 0 to 550C / Humidity 5 to 95% non condensing
OPTIONAL
Transmitter Supply: 24 V DC, 30 mA
Retransmission Output:4 to 20 mA / 1 to 5 V, Isolated
Alarm Output: Potential free Relay Contact – 2 nos ( 1 c/o, 1 Amp. @ 230 V AC) Configurable for high, low
Batch Output: Potential free Relay Contact (1 c/o, 1 Amp. @ 230 V AC)
Communication Port: RS 485 / RS 232 supporting MODBUS RTU protocol
