Electronet’s series FL-200 are 2 rotameter transmitter specially used for various industrial applications. These are general purpose, direct reading, relatively simple instrument recommended for universal use where a reliable sensitive repeatable indication of continuous flow rate is required for process control or other purpose. This type of instruments consists of essentially a vertical mounted, tapered, calibrated tube with a float inside it. These are designed to measure the rate flow of liquids or gases inside the pipe.
Technical Specifications
Media: Liquids (Clear)
Viscosity: 100 cp max
Pick off Type: Hall Effect sensor
Line Size: 15 NB to 50 NB
Display: 8 x 1 LCD
Type of Output: 4 to 20 mA DC, 2 wire
Calibration Range: As per requirement (Factory Calibrated)
Accuracy: +/- 2% F. S.
Linearity: +/- 1%
Repeatability: +/- 1%
Pressure Drop: Approx 0.28 kg/cm3 at max. flow
Turn down ratio: 10:1 to 100:1
Process Temperature: 0 to 150oC
Process Pressure: 0 to 10 kg/cm3
Material of construction: Body, Float, Support & Flange – SS 316
Power Supply: Loop powered, 24 V DC, External
Power Consumption: < 40 mW
Response Time: < 100 mSec
Temperature Coefficient: +/- 0.01% peroC
Transmitter Enclosure: Flame-proof, lP-65, llA, llB CMRI Certified
Process Connections: Flanged
Mounting: In-Line, Vertical
Operating Conditions: Temperature 0 to 55oC / Humidity 5 to 95% non condensing
